View SPL2F94-2S_4358966.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Laserdiode im TO-220 Gehause mit FC-Faseranschlu 1.5 W cw Laser Diode in TO-220 Package with FC-Connector 1.5 W cw SPL 2F94-2S
Besondere Merkmale * Effiziente Strahlungsquelle fur Dauerstrich- und gepulsten Betriebsmodus * Zuverlassige InGa(Al)As kompressiv verspannte Quantenfilm-Struktur * Neue optimierte Einzel-Quantenfilm-Struktur * Verbesserte Zuverlassigkeit, niedrige Laserschwelle, hohere Effizienz * Kleines TO-220 Gehause mit effizienter thermischer Kopplung * Integrierter Thermistor ermoglicht Wellenlangensteuerung uber die Temperatur * FC-Faseranschlu fur effiziente Ankopplung in einen 200 m Faserkern mit einer NA von 0.22 Anwendungen * Pumpen von Faser-Lasern und Verstarkern (Er, Yb) * Pumpen von Festkorperlasern (Nd: YAG, Yb: YAG) * Medizinische Anwendungen * Loten, Erwarmen, Beleuchten * Energieubertragung * Test- und Messsysteme Sicherheitshinweise Je nach Betriebsart emittieren diese Bauteile hochkonzentrierte, nicht sichtbare InfrarotStrahlung, die gefahrlich fur das menschliche Auge sein kann. Produkte, die diese Bauteile enthalten, mussen gema den Sicherheitsrichtlinien der IEC-Norm 60825-1 behandelt werden.
2007-04-13 1
Features * Efficient radiation source for cw and pulsed operation * Reliable InGa(Al)As strained quantum-well structure * New optimized single quantum-well structure * Improved reliability, low treshold current, higher efficiency * Small TO-220 package with efficient thermal coupling * Included thermistor allows wavelength control by temperature * FC-type connector for efficient fiber coupling into a 200 m / 0.22 NA fiber Applications * Pumping of fiber lasers and amplifiers (Er, Yb) * Pumping of solid-state lasers (Nd: YAG, Yb: YAG) * Medical applications * Soldering, heating, illumination * Energy transmission * Testing and measuring applications
Safety Advices Depending on the mode of operation, these devices emit highly concentrated non visible infrared light which can be hazardous to the human eye. Products which incorporate these devices have to follow the safety precautions found in IEC 60825-1 "Safety of laser products".
SPL 2F94-2S
Typ Type SPL 2F94-2S
1)
Wellenlange Wavelength1) 940 nm
Bestellnummer Ordering Code Q65110A1828
Andere Wellenlangen im Bereich von 780 nm ... 980 nm sind auf Anfrage erhaltlich. Other wavelengths in the range of 780 nm ... 980 nm are available on request.
Grenzwerte (kurzzeitiger Betrieb) (TA = 25 C) Maximum Ratings (short time operation) Bezeichnung Parameter Ausgangsleistung (Dauerstrichbetrieb) Output power (continuous wave)1)2)
1)2)
Symbol Symbol min.
Wert Values max. 2.0 3.0 - -
Einheit Unit W W
Pcw Pqcw
Ausgangsleistung (Quasi-Dauerstrichbetrieb)1)2) (tp 150 s, Tastverhaltnis 30%) Output power (quasi-continuous wave)1)2) (tp 150 s, duty cycle 30%) Sperrspannung Reverse voltage Betriebstemperatur3) Operating temperature3) Lagertemperatur3) Storage temperature3) Lottemperatur an den Anschlussen, max. 10 s Soldering temperature at the pins, max. 10 s
1)
VR Top Tstg Ts
- - 10 - 40 -
3.0 + 60 + 85 260
V C C C
Der Betrieb bei den Grenzwerten beeinflusst die Lebensdauer. The operation at the maximum ratings influences the life time. Die optischen Daten beziehen sich auf die Ausgangsleistung eines Faserstutzen (Kern 200 m, 0.22 NA). Optical data refer to the output from a fiber stub (core 200 m, 0.22 NA) Die Entstehung von Kondensflussigkeiten mu ausgeschlossen werden. Bedewing has to be excluded.
2)
3)
2007-04-13
2
SPL 2F94-2S
Diodenkennwerte (TA = 25 C) Diode Characteristics Bezeichnung Parameter Zentrale Emissionswellenlange1) Emission wavelength1) Spektrale Breite (Halbwertsbreite)1) Spectral width (FWHM)1) Opt. Ausgangsleistung2)3) Output power2)3) Differentielle Effizienz2)3) Differential efficiency2)3) Schwellstrom Threshold current Betriebsstrom1)2)3) Operating current1)2)3) Betriebsspannung1) Operating voltage1) Differentieller Serienwiderstand Differential series resistance Faserdurchmesser Fiber diameter Numerische Apertur Numerical aperture Temperaturkoeffizient des Betriebsstroms Temperature coefficient of operating current Temperaturkoeffizient der Wellenlange Temperature coefficient of wavelength Symbol Symbol min. peak 930 - - 0.60 0.35 - - - 50 - Wert Values typ. 940 3.00 1.50 0.75 0.45 2.50 1.90 0.15 200 0.22 0.50 0.30 max. 950 - - - 0.60 3.00 2.10 0.25 - - - - nm nm W W/A A A V m - %/K nm/K Einheit Unit
Pop
Ith Iop Vop Rs D
NA
Iop/IopT - /T -
2007-04-13
3
SPL 2F94-2S
Diodenkennwerte (TA = 25 C) Diode Characteristics (cont'd) Bezeichnung Parameter Thermischer Widerstand (pn-Ubergang Warmesenke) Thermal resistance (junction heat sink)
1)
Symbol Symbol min.
Wert Values typ. 5 max. - -
Einheit Unit K/W
Rth JHS
Standardbetriebsbedingungen beziehen sich auf 1.5 W cw optische Ausgangsleistung. Standard operating conditions refer to 1.5 W cw optical output power. Standardbetriebsbedingungen beziehen sich auf die Verwendung einer Multimode Faser (Kern 200 m, 0.22 NA) Standard operating conditions refer to the usage of a multimode fiber (core 200 m, 0.22 NA) Optische Leistungen werden mit einer Ulbrichtkugel gemessen. Optical power measurements refer to an integrating sphere.
2)
3)
Typische Koppeleffizienz bei Verwendung anderer Fasertypen (Standardfaser : Kern 200 m, 0.22 NA, c =1) Typical coupling efficiency by using other fiber types (Standard fiber: core 200 m, 0.22 NA, c =1) FaserkernNumerische durchmesser Apertur NA Core Diameter /m Numerical Aperture NA 125 100 50 0.35 0.22 0.22 Koppeleffizienz Coupling Efficiency c 940 nm 0.90 0.75 0.25
Optische Leistung aus der Faser mit der Koppeleffizienz c Optical power from the fiber output with the coupling efficiency c Popt = x c x (I - Ith)
2007-04-13
4
SPL 2F94-2S
Optische Kennwerte Optical Output Power Popt vs. Forward Current IF (TA = 25 C) SPL 2F94-2S
1.6 W 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0
OHW00796
Optical Characteristics Optical Spectrum, Relative Intensity rel vs. Wavelength (TA = 25 C, Popt = 1.5 W) SPL 2F94-2S
1 rel %
OHW00798
Popt
0.75
0.5
0.25
0
1
2
A
3
0
920
930
940
950 nm 960
IF
NTC Thermistor RT = R0 x exp (B x (1/T - 1/T0))
R0 = 10 k 3%, T0 = 25 C = 298 K, B = 3730 K
R NTC
350 k
OHL01668
250 200 150 100 50 0 -40 -20
0
20
40
60
C 100
T
2007-04-13
5
SPL 2F94-2S
Alle Laser werden vorgetestet und gema den gemessenen Kennwerten ausgeliefert. Bezuglich Sicherheit, Verpackung, Behandlung, Montage und Betriebsbedingungen lesen Sie bitte sorgfaltig unsere Notes for Operation I". Mechanische Montage Befestigungsloch (geeignet fur M 2.5). Durch die gute Waremeleitfahigkeit der TO-220 Bodenplatte (Kupfer) wird die Warme auch bei Befestigung an nur einer Seite gut abgeleitet. Zur exakten Positionierung des Gehauses und anderer Teile, z.B. Linsen, kann das TO-220-Gehause mit entsprechenden Klemmen oder Schrauben (max. M 2.5) befestigt werden. All devices are pretested and will be delivered including measured laser characteristics. For safety, unpacking, handling, mounting, and operating issues, please read carefully our "Notes for Operation I". Mechanical Attachment Mounting hole (suitable for M 2.5) Because of the good thermal conductivity of the TO 220 base plate (copper) the heat loss is properly dissipated even if the component is attached on one side only. For exact positioning of the TO component and other parts, e.g. lenses, the TO 220 package can be attached with appropriate clamping devices or screws (max. M 2.5).
2007-04-13
6
SPL 2F94-2S
Mazeichnung Package Outlines
10.8 (0.425) 10.4 (0.409)
15.3 (0.602) 14.5 (0.571)
2.8 (0.110) 10.8 (0.425)
10.4 (0.409)
2.75 (0.108) 2.45 (0.096)
1.0 (0.039) 0.6 (0.024) 1.2 (0.047) 1.0 (0.039)
14.0 (0.551) 16.7 (0.657)
12.4 (0.488) 16.3 (0.642)
3.2 (0.126)
123 o0.7 (0.028) o0.5 (0.020) 2.74 (0.108) 2.34 (0.092) 4.6 (0.181) 4.4 (0.173) 5.2 (0.205) 5.0 (0.197) 5.5 (0.216) 4.9 (0.192) 9.7 (0.382) 9.5 (0.374) 3.0 (0.118) 2.5 (0.098) 2.2 (0.087)
2.74 (0.108) 2.34 (0.092)
1 Cathode 2 NTC 3 NTC case Anode
2.6 (0.102)
GTOY6062
Mae in mm (inch) / Dimensions in mm (inch).
Published by OSRAM Opto Semiconductors GmbH Wernerwerkstrasse 2, D-93049 Regensburg www.osram-os.com (c) All Rights Reserved. The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components 1 , may only be used in life-support devices or systems 2 with the express written approval of OSRAM OS. 1 A critical component is a component usedin a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or effectiveness of that device or system. 2 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered.
2007-04-13
7
M8 x 0.75

▲Up To Search▲

Price & Availability of SPL2F94-2S

	To Download SPL2F94-2S Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .